Equipment failure shatters fireplace glass panel
The piece of equipment that failed was a residential gas fireplace. During lighting of the appliance a small explosion occurred causing the glass panel on the front of the fireplace to shatter.
Regulated industry sector
Gas (Natural gas system)
Site, system and components
This gas fireplace uses a manually ignited gas pilot burner. By pushing down on a control knob in the pilot position, gas flows from a pilot valve to the pilot burner and a push of the spark button attempts to light the pilot burner. A flame sensor called a thermocouple proves the pilot is lit and the user switches the control knob to the “on” position which allows gas to flow through the main burner and the pilot will light the main burner of the fireplace.
During the lighting of the fireplace a large amount of gas was introduced into the inside of the fireplace before the manual spark ignitor was pressed. Once the ignitor was pressed and a spark was introduced, it ignited the gas inside the fireplace, this created an explosion.
Facts and evidence
- Fireplace had been operating earlier in the day of incident.
- Was informed by homeowner and confirmed with contractor that fireplace had been serviced and tested 2 weeks prior to incident.
Causes and contributing factors
It is very likely that the cause of the explosion in the fireplace was due to the pilot valve being held or stuck open for an extended period of time before attempting to light the pilot burner with the spark ignitor. If the spark ignitor is pressed in this condition it is very likely an explosion would occur inside the fireplace.
- Qty injuries: None
- Injury description: None
- Injury rating: None
- Damage description: The glass panel on the front of the fireplace shattered.
- Damage rating: Moderate
- Incident rating: Moderate